Blog Archives |

The Basics Of How To Set Up A Spinning Reel, and More!

The Basics Of How To Set Up A Spinning Reel, and More
Setting Up the Drag of a Spinning Reel Featured

How A Spinning Reel Works

Before you learn the basics, on how to set up a spinning reel and how to cast, it helps to know how a spinning reel works. 

Spinning reels are easy to use and are great for casting lightweight baits or lures. A baitcaster, by contrast, usually requires more skill to use and is also meant for heavier lures or baits.

Several physical concepts govern how a spinning reel works, and in a nutshell, it is mounted under a rod instead of over. It also uses a fixed spool.  

When you crank a spinning reel, a line guide spins around the spool and lays the line on it.  Additionally, as you turn the handle, the spool moves forward and back. This causes the line to be layed oevenly over the spool instead of being bunched up at one end.

For right-handed people, the rod is held and cast by the right hand, leaving the handle of the reel to be worked on by the left hand. However, most spinning reels have handles that can be switched from side to side. This will allow you to select which hand you want to crank the handle with.

Note: If you're using braided line click : How to spool braided line on a spinning reel.

How To Set Up A Spinning Reel

One key thing to avoid when setting up your spinning reel is line twist. Here's a quick guide on how to set up a spinning reel without line twist:

1.  Gather the needed tools such as your spinning reel, your spinning rod, your fishing line spool, and a pair of scissors.

2. Before you start putting the line on, you'll want to attach your reel to the rod by placing the reel foot in the reel seat and screwing down the seat so that it's nice and tight. You don't want the reel to move once it's seated.

3. I like to put the tip of the line through the first guide on the rod. 

4. Open the bail arm, then use an arbor knot or a uniknot to tie the line to the spool.

5.Once the line is tied to the spool close the bail.

6. Here is the important part. When you look at a spinning reel from behind, you'll notice that it cranks in a counter clockwise direction. As you look past the reel to the spool that the line is coming off of, make sure that the line is coming off in a counter clockwise direction too.

7. Fill the reel until there is about 1/8th of an inch between the line and the end of the spool.

These are the basic steps on how to set up a spinning reel and successfully putting one in use, and it can enhance your performance as you head outdoors to fish. After learning this, you should also learn how to cast a spinning reel.

Knowing how to cast a spinning reel properly can be difficult if there is nobody to guide you in doing so. You can easily find tutorials on how to cast a spinning reel on the internet or in video streaming sites such as Youtube. Some tutorials on How To Cast A Spinning Reel 101 can be as short as a minute, but you can search for more comprehensive lectures. Casting a spinning reel involves precision in manipulating the physical laws that govern fishing, and in a nutshell, you can cast your spinning reel by following these steps:

1. Hold the rod with your dominant hand, while using the other to hold the fishing line.

2. Point your pole towards your potential catch. Tilt your fishing pole back at an angle opposite to your target.

3. Swing the pole forward and release the line that you held with your other hand.

4. Wait for a fish to take your bait.

These are only some of the steps you can follow to cast a spinning reel successfully. The most important step is to take precaution whenever you go outdoors to consummate your fishing plans.

How to Care for a Spinning Rod and Reel

As you learn the concepts needed for successful fishing, you should also learn how to care for a spinning rod and reel to enhance its shelf life under your care. Doing so can help you save time, money and effort, and all of these can provide answers to your problems with equipment durability. For starters, you should always keep your equipment dry. Wash any traces of dirt from your rods, lines, and reels and pat them dry. Store them in a cool, dry place to prevent them from rusting. If you've used your equipment in salt water, make sure you wash it with fresh water. Lubricate your wheel regularly to avoid your gears from getting stuck.

Fishing is a popular recreational activity, especially during the summer. Before you start exploring this new activity, do some research and learn the things you should know to maximize your first fishing experience. Maintain your equipment properly by handling them with care and by making sure they are stored appropriately.

A note on Outdoor Activities

Outdoor activities such as recreational fishing have been promoted by many experts due to the emotional, intellectual, mental and physical benefits it can give to an enthusiast which further helps in developing and enhancing an individual's overall well-being.

In this regard, knowing the basics of recreational fishing ranging from the equipment needed down to the actual activity is essential for any aspiring angler. Things such as learning how to set up a  spinning reel, how spinning reels work, how to cast a spinning reel and how to care for a spinning rod and reel, are only some of the basic concepts any enthusiast should know.

How A Spinning Reel Works And Other Things Beginners Should Know

How a spinning reel works
How a spinning reel works

Recreational fishing is slowly gaining popularity, given that this hobby has enabled many people to enjoy the benefits of this activity. Like any other recreational sport or activity, recreational fishing has given many psychological benefits to fishing enthusiasts, thereby keeping their overall well-being at optimal conditions. If you are considering getting into this activity, then you should know the basics of using the equipment you need. Knowing the basics such as how a spinning reel works, how to set up a spinning reel, and understanding different types of fishing reels can surely aid you on your first fishing trip and make it a memorable experience. You can learn all these concepts through a guide you can find online. Casting a spinning reel instructions or guides can help you with steps on how spinning reels work, which can ultimately help you enjoy your fishing trips thoroughly. With this in mind, studying things in advance can help you fish with other anglers and employ a more efficient system of catching that trophy fish with little to no trouble.

how to set up a spinning reel

Understanding Different Types of Fishing Reels

There are many different kinds of fishing reels which can be used for fishing. These reels work differently from each other, that is, these reels work for specific types of parts, gears, and activities which will ultimately be determined by the anglers who will cast the fishing line and rod. Understanding different types of fishing reels can help you employ a better fishing system for you to cast your line with less drag with optimum efficiency. The different types of fishing reels include:

  1. Spinning Reel - this is the most popular reel of choice due to how user-friendly it is, it is easy to use and efficient at the same time.
  2. Baitcasting Reel - this reel is difficult to use, given that the spool has a tendency to turn as you cast your fishing line.
  3. Spincast Reel - it is similar to a spinning reel, but the parts and gears are enclosed, limiting the line you can cast and also limiting your accuracy
  4. Conventional Reel - similar to a baitcasting reel, a conventional reel can get difficult to use. This reel is normally used for bigger fish.

As you can see, each type of fishing reel has a different set of features which are all defined by how their parts are assembled for efficient usage. It is important to note the anatomy of fishing reels can be different from each other, but they all employ a similar principle. Understanding different types of fishing reels can enhance your performance as you determine which ones will best suit your intended activity.

How a Spinning Reel Works

Now that you have gained an understanding on the different types of fishing reels, knowing how a spinning reel works should come next. Given that a spinning reel is one of the most common and popular choices used by anglers. This type of reel has been in use in North America as early as the late 19th century, and it is considered to be one of the most efficient and easy to use fishing systems in existence. Understanding how a spinning reel works is simple; a spinning reel works by using a fixed line spool with a safeguard and roller framework (or wheel) that goes around the spool to take up and discharge the fishing line. In turn, this can enable a user to cast the rod and the line at various distances to catch smaller fish to moderately heavy bass. This is how a spinning reel works, and it is important that you learn how to set up a spinning reel for a more efficient catch.

How to Set up a Spinning Reel

As you learn how a spinning reel works, it is equally important to learn how to set up a spinning reel properly to ensure your fishing trip will be lined with less trouble. As you learn how to setup a spinning reel, you should make sure you follow an efficient set of instructions for casting a spinning reel after you gain some degree of understanding the different types of fishing reels so you will catch your fish with a clean sweep. Some of the steps on how to set up a spinning reel are as follows:

  1. Collect your needed tools, parts, and equipment.
  2. Familiarize yourself with the anatomy or the different parts of the equipment.
  3. Start spooling the reel.
  4. Attach the fishing line or the fishing string to the rod.
  5. Tie the knot and set up the drag knob.
  6. Cast your bait and reel the line.
  7. Enjoy Fishing!

With these steps, you can set up a spinning reel and see how a spinning reel works in no time.

casting a spinning reel instructions

Importance of Casting a Spinning Reel Instructions

As you learn how a spinning reel works and how to set one up, you should also know the proper maintenance of your equipment. As a buyer, you want to maximize the longevity of your reel while making sure it functions with maximum efficiency. In this regard, you can look for casting a spinning reel instructions which you can easily find on the internet to help you care for it. As you learn the functionalities of your spinning reel, it is equally important to learn how to work with it by looking at casting a spinning reel instructions to ensure you are maximizing the functionality of your fishing reel.

Instructions for casting a spinning reel should be easy to understand and follow while giving tips on how to take care of it. As a guide, some spinning reel instructions for equipment care and maintenance include:

  1. You should lubricate your spin wheel regularly to avoid getting the gears, or the levers stuck.
  2. You should clean your spinning reel after using it by washing it with fresh water especially if you've used it in saltwater.
  3. You should store your spinning reel in a cool, dry place to avoid it from getting rusted.

Ultimately, learning how a spinning reel works and learning how to take care of your equipment can help you maximize your performance as you go on a fishing trip.

How to Spool Braided Line on a Spinning Reel and Other Fishing Equipment Tips

How to spool a braided line on a spinning reel
How to spool a braided line on a spinning reel

Outdoor leisure activities have been noted to induce health benefits such as improved emotional, mental, intellectual and physical health on many people. Activities such as recreational fishing have enabled aspiring enthusiasts to take advantage of these benefits and become a better version of themselves in the long run.

pros and cons of braided fishing line

With this in mind, many fishing enthusiasts have continued to look for ways to learn more tips and tricks to enable a more efficient fishing activity using their equipment. At this rate, many have learned some tricks such as how to spool a braided line on a spinning reel, to ensure that they are getting the best out of their fishing trip.

Braid ready spinning reels may be available in the market, but in any case, where supplies are scarce, it pays to know techniques on spooling braided line on a conventional reel while learning the pros and cons of braided fishing line. Doing so can help you decide whether you should pursue with a braided line or not. Hence, you should know the pros and cons of braided fishing line used to make sure that you are best suited to utilize this item.

Pros and Cons of Braided Fishing Line

Some kinds of equipment may work well with you, but some of them simply won't and it is all a matter of preference from the angler's point of view. There are several pros and cons of braided fishing line and it is important that after you find out what these are, you can assess yourself if whether this is the best design for you or not. Some pros of using braided fishing line include:

  1. It has a smaller diameter compared with monofilament.
  2. It is highly durable, given that it is composed of several strands of the line material.
  3. Because of its durability, a braided fishing line can be used to catch heavier fish. It can also be used for deeper waters such as bodies of saltwater where both depth and fish size are major deterrents of successful fishing.

While the pros mentioned above are considered highly beneficial to a fishing performance, there is also another side of the story. Braided lines also have cons and these include:

  1. It still has the tendency to tie up unnecessarily and form knots when not spooled properly onto the reel.
  2. It can be expensive, although some stores do offer them at good prices.
  3. One of the common troubles with braided lines is getting injured. Some may be abrasive and can cut through your skin.

Also, keep in mind that you should use fishing knots for braided line to prevent knot slippage. 

If you are trying to decide between using a braided fishing line or not, always take note of the pros and cons of the braided fishing line before you make a decision to make sure that you will encounter less trouble as you begin to scout for a catch in the water.

How to Spool Braided Line on a Spinning Reel

As you learn the advantages and disadvantages of using a braided line, it also pays to know how to spool braided line on a spinning reel. These pros and cons can ultimately guide you in employing safe techniques on how to spool a braided line on a spinning reel properly. You can look for a video on youtube which demonstrates the proper way of spooling a braided line on a spinning reel. In this regard, these are some ways on how to spool a braided line on a spinning reel properly:

  1. Study the anatomy of your fishing gear. This can help you determine where to attach one part and where to attach the other.
  2. Gather all your needed materials and equipment.
  3. Use a set of gloves if you need to especially if you think that the braided line is abrasive to the skin.
  4. Using an arbor knot, tie your line to the arbor to load it effectively. Tying this can effectively anchor your line onto your spinning reel.
  5. Put the roll of your line and place the line over and under your fingers in one hand, alternately. Clench your fist into light grips to induce a bit of pressure on the line. Start spooling.
  6. Check the line for any twists, given that some lines have large tendencies of getting twisted.

These are only some of the steps you can follow on how to spool a braided line on a spinning reel effectively.

spooling braided line on a conventional reel

Braid Ready Spinning Reels

By now, you may have already learned how to spool braided line on a spinning reel, but did you know that there are also braid ready spinning reels which can accommodate these braided lines readily? These braid ready spinning reels can wind your line with little to no trouble as braid ready spinning reels were designed in a way which can prevent a line from getting twists due to unneeded twisting. The key to getting a braid ready spinning reel is to look for forums and reviews on recommended products or braid ready spinning reels to ensure that you are getting the best product around.

As you begin your journey into the world of recreational fishing, there are a few things that you must remember.

First, you need to familiarize the concepts and principles underlying behind how the equipment operates. Doing this can help you assess which types of gears work best for you and which ones don't, depending on your intended activity level.

Next, learn how to set-up your gear. Check videos and other guides on how to spool your line on a reel and make sure that you adjust accordingly with your own set of conditions.

Lastly, you can go and check for other types of equipment such as braid ready spinning reels in any case that you have chosen a certain type of fishing line but you can't fit it properly with your current reel.

Always remember that it pays to know the basics of any activity you want to get yourself involved in, so you better do some research to enhance your fishing experience.

A Guide on How to Fix Anti-Reverse on Spinning Reel

How to fix anti reverse on a spinning reel
How to fix anti reverse on a spinning reel

The reel of a fishing tackle is designed to cast out the line and retrieve it through the handle and spool.

Many of the later models of fishing reels have an anti-reverse lever or clutch. This mechanism allows for the fishing reel to be spun in both ways.

Have you ever come across glitches with the anti-reverse of your spinning reel? Do you have an idea how to troubleshoot after diagnosing what may be wrong?

If not, then this article can be of help. We will be discussing how to fix anti-reverse on spinning reel of your fishing tackle.

the spring within the spinning reel is jostled and will need to be put back onto its correct position

How to Fix Anti-Reverse on Spinning Reel: A Gist

However, there are instances when this anti-reverse mechanism is pushed or moved, which causes it to be spun in only one direction. That should never be the case of an anti-reverse lever functioning normally.

Repairing this glitch in the anti-reverse on a spinning reel will have to be done by releasing the clutch or lever so as to allow it to move freely again. You can start the repair with checking what may be the more common issues or fixes first. Otherwise, there may be other anti-reverse problems which you will need to get more deeply into and diagnose.

How to Fix Anti-Reverse on Spinning Reel: The Two Most Common Problems

Anti-Reverse Clutch Problem Number One: The Spring Within the Spinning Reel Is Jostled and Will Need to Be Put Back onto Its Correct Position.

Disassembly of the spinning reel. First off, you have to disassemble your spinning reel and take out its certain specific parts. As you do so, it is important to remember which part should be appropriately placed where. Recalling the positions of the parts on the reel will make it easier for you to put them back together after troubleshooting the issue of the spring within the spinning reel.

Turn the knob until it comes off the reel and loosen it all the way until it comes off. Thereafter, pull the spool off. This will be followed by the gear, then the ring and then the stopper screw. The stopper screw will have to be taken out first so you will be able to take out the knot which is secured under the stopper screw.

You will then notice an extra stopper screw or washer which goes around the knot. This extra stopper screen holds the knot even sturdier and keeps it from slipping. Simply pull it out just like you did with the gear, the ring, and the first stopper screw. You can then unscrew the knot and slide it off all the way.

Testing the anti-reverse lever. You can attempt flipping the anti-reverse clutch. However, if it still proves to not work, then it must be the spring and you will notice it if you look more closely.

The spring within the spinning reel is jostled and will need to be put back into its correct position.

It is a very little and very short spring. What you have to do then is to thread the spring back into its downward position. You can try and use a tiny push pin to do this until the little spring finds the loop and connects back onto the loop where it is supposed to be to function normally.

Now try if the anti-reverse clutch is flipping in both ways. If it does, then the problem has been with the spring all along.

Reassembly of the spinning reel. The process will be the exact opposite of the disassembly of the spinning reel.

Therefore, the knot goes back in first. Note that there are two sides of the knot. Be sure the flat edge will be facing down while the beveled edge will be facing upward. Otherwise, the knot will only slide off. Screw the knot in place with a screwdriver.

Then the gears slide back on, followed by the spool. Then you are done.

This is one way on how to fix anti-reverse on spinning reel.

Anti-Reverse Clutch Problem Number Two: The Hammer Piece of the Anti-Reverse Gets Caught on the Latching Gear.

the hammer piece of the anti-reverse gets caught on the latching gear

Fishing Line Fishing Reel Equipment Reel Fishing

This is a little more difficult to diagnose compared with the previous anti-reverse issue and is a more complex assembly.

Disassembly of the spinning reel. Perform the exact same process explained in one of the previous sections in order to take apart the parts of the spinning reel.

The glitch with the latching gear. You will see that the switch may actually be working. However, when you flip the switch, the hammer piece of the anti-reverse gets caught on the latching gear. This is where you do the troubleshooting.

Take out the gear and you will notice the bushing inside it, i.e., the bright silver ring within the gear. This bushing or ring is slipping from the teeth of the gear.

The solution. What you have to do next is to completely slide the bushing or ring off the teeth of the gear and put it permanently back on with the use of an adhesive coating. Note that you should not overdo the use of the coating. A little amount will do the job of affixing the bushing or ring into the gear. Leave it for 24 hours before putting back together in the spinning reel to guarantee the adhesion of the bushing or ring to the gear.

Testing the anti-reverse lever. After the bushing or ring is secure within the gear, put the latching gear back on. Try to work the anti-reverse and see if the latching gear still catches the hammer piece of the anti-reverse clutch. If it no longer does, then you have been successful at your anti-reverse troubleshooting.

After the effective troubleshooting of the second possible issue with your anti-reverse lever, reassemble the spinning reel, putting back together the pieces accordingly in reverse of the process of taking them apart.

This is another way on how to fix anti-reverse on spinning reel.

Is your diagnosis of the glitch in the anti-reverse on the spinning reel of your tackle not part of what has been discussed above? Is the anti-reverse itself the problem? Is it in any way broken or cracked? Then the anti-reverse may need to be replaced with a new one.

For now, you can use this article as a simple guide in trying to at least diagnose what may be causing the malfunctioning of the anti-reverse clutch on your spinning reel. In this way, you will have an idea on how to fix anti-reverse on spinning reel.

How To Spool A Spinning Reel Properly to Avoid Kinks and Jams

How To Spool A Spinning Reel Featured
How To Spool A Spinning Reel Featured

Believe it or not, the best way to spool a spinning reel is to ask someone at the sporting goods store to do it for you. Most sporting goods stores have a really cool machine that does it quick, and easy. But any real angler needs to know how to spool a spinning reel! So no, we are not going to recommend that you wimp out and let someone else spool your reel. Doing it yourself, particularly learning how to spool a spinning reel, will provide you with the satisfaction of feeling like a true fisherman, which you’ll be once you learn.

braided line

The importance of doing it yourself -- and doing it the right way -- can not be understated. The more you know about the sport of fishing, the more successful you will be. And being assured that you know how to spool a spinning reel means that when you’re on the banks of the river, when the fish are jumping, hungry and biting, you’ll sling back your rod with confidence that once your line hits its mark, and that 7-10 pound bass strikes, you’ll feel comfortable with the knowledge that your reel, your line, and your rod will not fail you. And at the end of your fishing expedition you’ll be taking an impressive selfie, with your prize catch, and posting it on social media, becoming the envy of all your friends. The post of a thousand likes, no doubt!

Without further ado, what follows is a simple guide in what you need to know on how to spool a spinning reel.

Why It Matters to Spool a Spinning Reel Properly

Your fishing line is an integral component of your fishing equipment. And the most important part of your gear, quite simply, is your reel. Together, you’ll sink or swim when at the lake. Think about it. If you don’t spool your reel appropriately, your line can kink, twist, jam, and just flat out fail you. And if you happen to be on the hunt for that elusive 35-pound catfish, and you know he’s out there, ready to take your bait, nothing is more frustrating than cranking your line out to that spot where your gut has been telling you that catfish is waiting for you, and then your reel jams up on you. There aren’t enough curse words to express how frustrated you’ll be at that moment.

So don’t let this happen, take some time before you head out to your favorite fishing hole and spool your reel properly.

The first thing you need to do, is use the proper fishing line for the type of fish you’re trying to catch, and yes, sometimes it matters whether you’re fishing in freshwater or saltwater. In general, spinning reels are ideally designed for lighter lines and smaller bait. That’s not saying you can’t use heavier line and bait, it’s just most fishing experts feel this way.

How To Spool A Spinning Reel Properly 2

Which Line Should I Use?

The most common type of fishing line is monofilament. It’s a single strand line that is buoyant and there is some flexibility in terms that there is some give (or a slight stretchability). This could be good, but if a line stretches, that also means it snaps more often. And there are certain levels of strength with monofilaments (well, this is true for all lines). Monofilament lines range for a 10-20 pound test line. This type of line is basic and good for most casual fishermen, and can handle fish like bluegill, smaller sized bass and catfish, etc.

The heavier test lines can handle fish which are heavier, but when you start to specialize, you need to be aware of the benefits of the other types of line such as braid lines, and fluorocarbon. Again, each type of line has different strengths available, so know what you are fishing for, and adjust your line decision accordingly.

How To Spool A Spinning Reel Properly 3

Now, braided lines actually go back further than nearly any type of line, and is popular because of its durability, braided lines don’t stretch, so it allows for more control, depending on what you are fishing for. The catch? Well, braided lines are more noticeable to the fish you are trying to catch, so it could spook your intended prey. But it’s durability and reliability makes it an extremely popular choice. Then there are the fluorocarbon fishing lines.

These lines are fairly new (in terms of using for reels) and are popular for fishermen who like how invisible they are in the water. Like braided lines, they also don’t allow for much stretching. Fluorocarbon lines aren’t all that great for fishing locations where your line might get pulled through debris (mossy areas, etc.). And in case you are wondering, the technique of how to spool a spinning reel is not affected by the line (or it’s thickness).

To boil it down, a search engine can help you decide the appropriate line for the type of fish (and location) you are aiming for on your outing. For our purposes, we’ll use monofilament when explaining how to spool a spinning reel.

What Is a Spinning Reel?

Just thought I’d throw this in here, a quick paragraph on exactly what a spinning reel is. Spinning reels, created by the French over 70 years ago, use a bail to control spinning your line into the water and back onto your reel. It’s a marvelous advancement, particularly for folks who don’t have the patience (or skill!) of fishing with an old-style fly fishing rod or the archaic, simple line tied to the end of a pole.

A spinning reel is the most popular reel among rod anglers. And the most common spinning reel is the open-faced reel. It’s design is to make casting easier and more effective. A spinning reel is excellent for catching bass. A good size bass may only weigh anywhere from 7-9 pounds, but they are elusive, can strike hard, and fight hard, making it the ultimate angling challenge. In short, bass will make you work for the privilege of adding him to your daily catch. And the spinning reel also lets the line do the work, without the reel putting forth more effort than is necessary. Many anglers also believe casting a spinning reel is more fun. Now, how do you spool a spinning reel?

How to Spool a Spinning Reel with Braided Line

How to Spool a Spinning Reel, the Official Guide

Ok, you’ve got your rod, your reel, and your monofilament line, so let’s get to work.

Besides your rod, reel and line, you’ll need to have on hand a new spool of your favorite fishing line, a knife (or something to cut the line with), a rubber band, and a basic knowledge of how to tie knots on fishing lines (yes, this is important).

The first thing you want to do is figure out which way your bail is turning. Pretend you’re ready to cast your rod, and hold your reel naturally. Grab the handle and pay attention to which way the bail is turning when reeling in your line after a cast. Remember this, because this is exactly how the line will be reeled in on the spool, and that means when you cast, the spool will do the opposite.

Some folks find it easier to run your line through the guides of the rod before the spooling process, so you might consider this before getting started. The advantage? It can be easier when you get to the point where you're cranking your line onto the empty reel.

Now, familiarize yourself with how the replacement line is spooled as you’ll want to spool your line on your reel the same way.

Once you’ve done this, it’s time to pull off some of the new line, and attach it to your reel. To do this, you’ll need to peel off just a few inches, so you can wrap the line around the empty reel, and tie it appropriately.

As for the knot needed, an arbor knot works just fine. A uni knot can also be used. Not sure how to tie either one? A Google search will provide a diagram so you’ll do the job properly. An arbor knot is basically a simple end over end knot, pulled through another end over end knot, creating one large double knot. Again, an internet search can show a picture (it’s what I had to do).

Ok, so you’ve got the knot tied, now is the time for a slow, steady, patient hand. I note this because we’re so used to reeling in our line rapidly, and you don’t want to do so when you're winding your new line to an empty reel.

With that said, slowly reel in your new line. If you are doing this without any assistance, place your replacement line spool on the ground. It’s important to provide some tension to the line, so you’ll want to place the line between your fingers as you reel in the line (again, with a slow, deliberate cranking motion). If you have a buddy to help you, have them hold the replacement line spool, by placing a pencil or a pencil-sized stick in the middle of the spool to make spooling easier, as well as use some additional finger pressure to provide a little more tension. The tension helps the line spool onto your reel with less slack, which can cause kinks.

how to spool a spinning reel

Another thing to keep in mind is keeping an eye out for any kinks or line twisting as you reel in the replacement line, if you notice any of the line twisting, unfortunately, the best thing to do is start over, unless you catch it immediately and can straighten it out.

Continue winding the line onto the reel, but keep in mind that you need to leave a space of about ⅛ of an inch from the top of the spool. Most reels have a tab, notch, mark or a line indicating where you need to stop spooling the line. This step is actually important, because if you don’t use enough line, it can cause your cast to be shorter causing problems at the top of the reel spool. Too much line can cause problems as well, as when the line is wet, it can cause the line to cause a backlash.

Once you have the appropriate length of replacement line on your reel, it’s time to cut the line. It’s a good idea to take a rubber band and place it over your newly spooled reel, that is if you are not going to be fishing immediately. Now that you know how to spool a spinning reel, you’re ready to hop on the boat and fish for that trophy bass without fear that your reel will fail you.

Another key thing to remember: whenever you are done fishing -- especially if you’ve been fishing in saltwater -- rinse off your rod and reel. And either dry it with a towel, or let it dry in the sun for a bit. Your equipment will rust. And saltwater causes rust to occur quicker.

A Final Thought On The Benefits Of Spinning Reels

Keep in mind that fishing is no longer simply a required skill necessary for survival. While some fishermen hit the waterways with the intention of using their catch to feed their family, fishing has become an exceedingly popular sporting and leisure activity. At its highest levels, it’s an extremely competitive sport with serious money on the line. And while equipment used for angling can be expensive, to enjoy the sport, you don’t have to spend a lot of money. A simple spinning reel (with rod) can be had for $20-30, for a basic, nothing fancy model. Replacement line costs from $3 on up, and fishing tackle can run from a couple of dollars on up.

How To Spool A Spinning Reel Properly 6

The point here is it’s an inexpensive sport, while at the same time, one of the few sports where you can sit back in a chair, at the lake, sip a cold one, and enjoy nature. You can fish patiently, where you spend hours trying to outsmart that elusive bass, or you could fish aggressively, like finding that farm pond stocked with hungry bluegill. And if you’re lucky at the end of the day, you’ll snag a nice sized fish -- or a few -- for dinner!

A Guide on How to Surf Cast with a Spinning Reel

A Guide on How to Surf Cast with a Spinning Reel Image
A Guide on How to Surf Cast with a Spinning Reel Image

Have you been considering going on a fishing adventure, particularly surf casting using a spinning reel, but do not quite know where to start or go about it?
Then you have come across the right page to give you tips on how to surf cast with a spinning reel.

how to surf cast with a spinning reel

How to Surf Cast with a Spinning Reel: The Basics

The line type and quality of the fishing tackle, the rod length and composition, and the casting or spinning reel all have an impact on your attempts at surf casting.
To better help you understand the ways to begin or improve surf casting with a spinning reel, this article will present a couple of pointers to get you started.

How to Surf Cast with a Spinning Reel: The Basic Principles Involved in Surf Casting

sur casting spinning reel

Basically the sinker with the lure or bait will move toward the direction of the rod tip, right before you stop it. In order to more effectively load the rod, you should at first cast slowly, gradually speed up the movement until you reach the fullest speed, right before stopping the rod.
The reason for this is because when you try and cast too fast initially, the lure or bait will move too quickly and thus not fully pull the rod.
To fully make use of the loaded rod, it is important to note you should sharply put the rod to a halt, but without dropping the tip from the line.
Logically, if you choose to lengthen your casting stroke, the more you will need to load the rod.
These are the basic principles involved in surf casting to keep in mind as we go along.
Now we are ready to get going and move on to the other aspects on how to surf cast with a spinning reel.

How to Properly Grip the Rod and When to Release the Fishing Tackle Line

how to grip a fishing rod

As a surf caster, you should be sure to not start the cast with the rod and the line placed too close together with each other. The reason for this is because loose slack can come in between the rod and the line which will in turn, result in the rod’s not being fully loaded.
The usual mistake in handling the rod together with the line. One of the most common mistakes when surf casting a rod, is anglers often add this loose slack by not grasping the fishing tackle line with enough pressure and tension.
Therefore, the tendency will be to release the line prematurely prior to the abrupt stop of the rod. This then results in the lure or bait floating high up into the air before going back down.
How to avoid this common mistake. To prevent from adding loose slack in between the rod and the line, hold the spinning reel stem in front and support it with another finger on the back side. Then carefully pick up the fishing tackle line with your forefinger so that your forefinger will be in front of the spinning reel stem.
Then pull the line toward the rod with your left hand supporting the rod.
As you cast and the line swings, gently release the fishing tackle line from the hold of your index finger.
As an additional note, you can wear a comfortable glove so as to avoid cutting your finger with the line. A
This is how to properly grip the rod and when to release the fishing tackle line. Bear these pointers in mind for they will definitely come in handy in your actual attempts at surf casting later on.

How to Surf Cast with a Spinning Reel: The Slingshot Stance

The slingshot stance involves your left foot taking the forward position, and your right foot, behind. However, the distance between your two feet should not be too far. Otherwise, you will not be able to efficiently rotate your hips as you surf cast.
The movement of your hip and torso. You need to hold the rod in a vertical position. Then swing the sinker with the lure or bait upward away from the water as you rotate your hips to turn your body slightly to the right. Be sure to do this with ease so you will be able to cast back the sinker on to the waters on time.
When the sinker and line are about level horizontally, rotate your hips to turn your torso back toward the front. This is when you gently release the line from being pressed with your forefinger as the rod swings back toward the waters. Again, the purpose of the gentle and careful release of the line is intended so as not to add loose slack in between the line and the rod.
The rod and the spinning reel. Remember to maintain the position of the rod, i.e., pointed in the same direction upon release of the line. As the sinker with the lure or bait hits the water, pivot the bail of the spinning reel. After the sinker hits the waters, let some time pass to allow it to completely sink, depending on the depth of the waters.

the proper way to cast your fishing rod

Some Tips for Controlling Your Hips and Body Movements When Surf Casting

Be sure your right arm will move accordingly as your weight shifts and as you rotate your body. This should be how to surf cast with a spinning reel because if your arm moves more quickly than your body will turn, the tendency is to pitch the line while losing power along the way, turning you into an arm-caster instead of a surf caster. 

Another reason for carefully controlling your hips and body movements when surf casting is because when your arm swings before you can turn your body back forward, you will then prematurely pull down the rod and unload it. 

These are only the most fundamental tips on how to surf cast with a spinning reel. The best practice still is to head out there to the waters and try and realize these guidelines. Go ahead, pick up your fishing gear and try your hands at surf casting until you get good at it.






Learn How to Spool a Spinning Reel Without Line Twist

Learn How to Spool a Spinning Reel Without Line Twist
Learn How to Spool a Spinning Reel Without Line Twist

Getting yourself to participate in outdoor activities can give you a lot of benefits in the long run. Recreational outdoor activities such as fishing can help you improve your emotional, mental, intellectual and physical health, thereby improving your overall state or well-being. With this in mind, it pays to know the techniques such as how to spool a spinning reel without line twist because it is considered to be one of the most basic set-ups that any enthusiast will eventually learn after years of experience.

If you are only a beginner, but you want to go ambitious with it, why not learn how to spool a spinning reel without line twist immediately, right? Despite the ease of looking for a guide on how to spool a spinning reel without line twist, you should first learn the basics of fishing such as how to spool a conventional reel, and how spinning reels made for the braided line are different from conventional ones. Doing this can help you avoid the common problems encountered by beginners, and this can ultimately save you resources such as your time, money, and effort.

how to spool a conventional reel

How to Spool a Conventional Reel

Learning how to spool a conventional reel is important, as employing proper techniques on how to spool a conventional reel can ultimately help you save time, money, and effort as mentioned earlier. Learning how to spool a conventional reel can help you prevent common problems with spooling such as occasional tangles down your fishing line and other common fishing problems which can be inefficient.

One of the simplest ways on how to spool a conventional reel is by taking your fishing line and placing it over and under each of your fingers (alternately) on one hand. After doing so, you should increase the tension to the line by clenching your hand holding the line into a fist. Put the fishing rod on the table and start loading your line onto the conventional reel. There are many other tips on how to spool a conventional reel, and it's up to you to select the best one which you would prefer especially on how to spool a spinning reel without line twist.

How to Spool a Spinning Reel Without Line Twist

Since a conventional reel works similar to a baitcasting reel, learning how to spool a line on a spinning reel can help you even get more familiar with the proper method of spooling and re-spooling your reel. Common techniques on how to spool line on a spinning reel are:

  1. Familiarize the parts and functions of the fishing equipment that you are going to handle.
  2. There is a bail on your reel, so you better check how to open and how to close it. Once you do, open the bail.
  3. Load your line by tying it to the arbor with an arbor knot.
  4. Put your line on a table, facing up. Place the line alternately over and under your fingers on one hand and clench into a fist. Start spinning the reel under moderate tension while making sure that the line being loaded is facing the same side where it is unloaded. Doing this can help you prevent or avoid unnecessary twisting of your line. The last thing you want to see is having too many tangles and twists on your line when you start to cast your rod.
  5. Check your line for twists. Twisting may occur every once in awhile so make sure that you fix them as soon as possible.
  6. Load the line onto the reel until only an eighth inch of the line is left hanging. Secure the line by placing something which will stop it from unraveling such as a rubber band.

Now that you know how to spool a conventional and spinning reel, the next thing you should know is how spinning reels made for braided line is different from the common ones. It should be noted that different reels have different requirements for the parts that you want to use it with. Particularly, reels can get very specific with the types of lines and load that you intend to use it with. As you may have noticed, a fishing line can vary in diameter, and this indicates that specific reels should be used for them. A spinning reel can only accommodate narrower fishing lines, so getting a spinning reel for a braided line makes it extra special.

how to spool line on a spinning reel

Fishing Line Angling Fishing Reel Tackle Equipment

What Makes Spinning Reels Made for Braided Line Different

By now, you may already have an idea that spinning reels can only accommodate certain lines, given that like any other machine, a spinning reel also has its limitations. Spinning reels for a braided line are different from common ones in a sense that it can accommodate a broader type of fishing line such as a braided one. Given that spinning reels have a threshold diameter of fishing lines which it can hold. Spinning reels made for a braided line are the perfect ones you can use if you decide to utilize a braided line.

Spooling a spinning reel can get technical, given that it takes some time of experience to learn how to spool a spinning reel without line twist, on your own. As a fisherman enthusiast, you can learn some tips by looking for it in a forum or through wikiHow tutorials which you can easily find over the internet. You can also check product reviews in case you want to get first-hand information from people who have employed specific techniques for effective spooling on certain products.

If a tip you've followed starts to cause problems with your performance, then remove this from your list and start searching for another one. Prevent wasting your resources by first determining the differences in setting up a spool on different kinds of reels and employing the best tips for each type to ensure that you will not encounter any major problem on your fishing trip. With these in mind, get the best experience that you possibly can by employing proper techniques in spooling a spinning reel. Enjoy fishing!

Setting Up the Drag of a Spinning Reel

Setting Up the Drag of a Spinning Reel
Setting Up the Drag of a Spinning Reel

If you wish to head out and try fishing, you should first know some of the basics of the sport. Aside from knowing the different types of lures, fish and other elements, you also need to know how to set the drag on a spinning reel.

It could be really nice to learn as you go, but there are consequences without first studying before taking the exam. Improper usage of your spinning reel can cause damage and you wouldn’t want that to happen as you go fishing. Learning how to set your drag is a of vital importance, and you want to know how to do it before hitting the nearest pond, river or lake.

The Drag of the spinning reel

The drag of the spinning reel

The drag of the spinning reel is a mechanism on your rod that lets you control the amount of pressure the fish can feel when it tugs on the line. Knowing how to set the drag is crucial for you to get a catch. Your drag must not be too tight or too loose. Otherwise, you might end up losing your catch.

To avoid or at least lessen the odds of losing your fish, you need to get to know the drag and also know how to set it. Basically, all you have to do is set the drag so it won’t be too tight or too loose. Having your drag too tight can make your line snap if the fish is too strong for the line to handle.

You may be able to just keep on reeling in the fish but the line can snap if it gives in to the pressure that the fish is putting on the line. If you set your drag too loose, you can also lose the fish as it keeps on going further and further away from you. You should first learn how to properly check and set the drag before fishing.

Understanding how the drag of the spinning reel works is key for you to make a decent catch. Make sure you go fishing with the correct drag setting. After all, a successful catch is part of the fun.

How to set the drag on a spinning reel

Setting the drag on a spinning reel is actually quite easy. You don’t need to know a lot of stuff for you to know how to set the drag on a spinning reel. You just need to have the correct feel for the right pressure for the line. And yes, this can take time and practice. What you want from your drag is to have the right resisting force, which isn’t too tight or too loose.

Having a drag too tight or too loose can potentially make you lose your fish. Make sure you set your drag correctly with the proper resisting force or pressure. Go fishing with the correct drag setting. For you to conveniently set the drag on a spinning wheel, you can simply test its resistance by pulling the line that is directly above the reel.

If the resistance is too strong, loosen the drag. If the drag is too loose, tighten it. To tighten your drag, simply turn the wheel of your drag to the right. To loosen your drag, turn the crank to the left. Your goal is to simply have a nice balance of tight and loose pressure. The drag should be tight enough for you to be able to get your fish without the line breaking.

You may want to set your drag a more loose than too tight. You may fight with the fish a little longer but it is better than losing the fish over a line snapping.

Fishing with the correct drag setting

How to set the drag on a spinning reel

Once you’ve learned the basics of setting up the drag of the spinning reel, you can then go and try your luck at fishing. You may first want to go and choose fishing spots teeming with fish that are easy to catch for you to learn more about and master fishing with the correct drag setting.

Beginners should try and fish for something simple, like bluegill. Bluegill will eat most anything offered, put up a decent fight (excellent for testing the drag), and when they feed, they are ravenous.

Fishing requires immense patience and it helps to have patience when setting up your drag. Don’t set the drag too tight so you can hastily get the fish. Realize that it’s better to just fight with the fish longer than lose it over a line that broke. Once you’ve mastered setting up the drag on a spinning reel, you can then fish anywhere you want.

Fishing with the correct drag setting should make you have enough pressure to reel in the fish without the line breaking and loose enough to not have the line acquire too much stress and potentially snapping. As much as you can, try not to change the setting of the drag of the spinning reel when fighting with a fish.

The drag is not designed to be adjusted during a fight. This is why having the correct drag setting is crucial. You should set you drag in a way that you won’t have to adjust it again during a fight with a fish. However, if you have a big and strong fish, you could make an exemption and loosen your drag for you to not lose the catch. It’s a gamble, but one that might pay off.

Fishing is without a doubt a great hobby and sport. It’s relaxing and it can be quite a pleasurable experience. There are a lot of astounding fishing spots in the world but it’s always great to first start at the nearest ones and learn and master setting up the drag on a spinning reel. With it, you can fish properly and correctly.

Fishing does require patience, this is crucial in setting up and adjusting your drag. Don’t set it too tight so you can quickly make the catch. You can actually lose your catch that way with your line breaking. Also, don’t have it too loose so the fish won’t take off on you.

Set it with the right pressure so you can still be able to reel in the fish and fight with it without having the line break. Once you master the basics on how to set the drag on a spinning reel and more, you can then explore the many great fishing spots of the world and begin catching new and different types of fish.

How To Clean A Spinning Reel And Other Maintenance Instructions

How To Clean A Spinning Reel And Other Maintenance Instructions
How To Clean A Spinning Reel And Other Maintenance Instructions

More people are now getting into recreational fishing because it has been proven to give practitioners benefits which can help them with their overall well-being. Recreational outdoor fishing can take people's minds off of things which stress them out, and help them relax every once in awhile.

In addition, this also gives fishermen a sense of accomplishment, especially if they've caught a trophy-sized bass during their fishing trips. Learning how to clean a spinning reel is important because it can enhance the durability of your fishing gear.

You can learn how to clean a spinning reel through fishing reel cleaning instructions, but you can also turn to reel cleaning and tuning services in any case you find it hard to follow the steps on how to clean and lube a spinning reel. Successfully executing these tips– can assure you become more efficient with how you use your fishing gear.

how to clean a spinning reel

Why Learning How to Clean a Spinning Reel Is Important

Keeping your fishing gear in optimal shape can give you several advantages. Regular cleaning can enhance the durability of your spinning reel and help you save on resources in the long run. Here are a few additional reasons why knowing the proper way to clean a spinning reel is important:

the significance of maintaining a regular spinning reel cleaning

1. Knowing how to clean a spinning reel can lessen the need to constantly repair your fishing equipment.

2. Getting reel cleaning and tuning services can help you become more efficient in fishing gear maintenance, given that experts have years of experience and knowledge on how to clean a spinning reel.

3. Getting information on how to clean a spinning reel can teach you the do's and don’ts of handling reels.

4. Routine maintenance performed on your spinning reels can be a nuisance at first, but in general, maintenance services can help you save money as well as control the frustration of having your equipment fail at inopportune times.

With these reasons in mind, learning how to clean a spinning reel should be your number one priority after you have bought your fishing gear.

How to Clean and Lube a Spinning Reel

why you should lube your spinning reel image

As mentioned earlier, it is important to keep your fishing gear in optimum working condition, as this can affect your efficiency and performance during your fishing trip. In addition to learning how to clean a spinning reel, you should also learn tips or hacks on lubricating your spinning reel. Here are a few tips you can use to clean and lubricate your spinning reels:

1. Gather the necessary materials you need to clean and lube a spinning reel. These materials include a wipe cloth, cleaning solution and some lubricating oil. Pay close attention to the spool as you clean your spinning reel.

2. Unscrew the handle of the reel and with the body inside the reel exposed, remove old lubricants and any debris using a soapy solution.

3. Reattach the handle of the reel and use a bit of lubricant. Make sure that you assemble it properly and completely, especially since bearings usually get lost when you disassemble spinning reels.

4. If you have gone on a saltwater fishing trip, wash your reels with tap water to remove the salt. Salt can accumulate on the fishing gear and make it rust or stick in not cleaned thoroughly.

5. Before storing, wipe your reels dry and store them in a dry location.

The tips mentioned above are only some of the life hacks on how to clean and lube a spinning reel. Following these fishing reel cleaning instructions can make reel cleaning and tuning more efficient.

Hiring Reel Cleaning and Tuning Services

Despite the availability of tutorials, like only Youtube videos, on how to clean a spinning reel or how to clean and lube a spinning reel, you might be too busy at times to do it on your own. Sometimes, there could be issues with your methods used in reel cleaning and tuning, which may be ineffective.

To help you resolve these reel cleaning and tuning issues, hiring experts to do reel cleaning and tuning services can help you do the job. Doing so can ensure quality maintenance work for cleaning reels is being applied to your reels.

Professional reel cleaning and tuning services use materials which may not be available in your cleaning kit, which is why getting professionals to do the reel cleaning and tuning for you can make the task more efficient. In this aspect, you are also assured they are doing reel cleaning and tuning services which follow proper and recommended fishing reel cleaning instructions.

the proper way of cleaning your fishing rod spinning reel

Fishing Reel Cleaning Instructions

Now that we've established the importance of knowing how to clean a spinning reel, you can do it on your own by following fishing reel cleaning instructions. There are many channels and blogs over the internet which can give you easy, yet comprehensive, fishing reel cleaning instructions and these instructions may be general or specific, depending on which types of reels (such as baitcasting reels, spinning reels, and many others) they are demonstrating.

Cleaning reels may be challenging, given that some aspects may get a bit more technical or specific, but in cases where fishing reel cleaning instructions of bloggers do not work, you should unsubscribe to them and look for more efficient tutorials.

Outdoor fishing has become a part of the culture of many people nowadays, given that it can give practitioners a lot of benefits. This hobby can get costly sometimes, as fishing gear and equipment require frequent tuning and maintenance.

As you enter the world of recreational fishing, note that you should learn how to clean a spinning reel (or any other kinds of reels) for you to efficiently and effectively execute techniques and snag the biggest catch. There are many fishing reel cleaning instructions you can follow and you should be keen on which ones are working for your reel cleaning and tuning maintenance.

Lastly, you should also lubricate your equipment, as this can help prevent drags from happening in the future. Follow us for more fishing tips, reviews and strategies!

How to Oil a Spinning Reel

How to Oil a Spinning Reel Image
How to Oil a Spinning Reel Image

If you love fishing, you might already be familiar with spinning reels. Spinning reels, like many other parts of a fishing pole, need to be properly cleaned and maintained. Regular maintenance of the spinning reel helps it to last longer. Maintenance such as cleaning and oiling of the spinning reel is also crucial for it to perform better. Today, we'll show you how to oil a spinning reel.

Cleaning and oiling are basic, simple and quick ways for you to keep and care for a rod great for fishing. You should look at oiling a spinning reel as a necessity. A clean and well-oiled spinning reel doesn't require much of your time, but it can offer the ultimate fishing experience. Make sure you always have a well-maintained reel for you to have an easy and enjoyable time fishing.

Fishing is one of the most enjoyable sports and if you want to be serious about it, you need to know the different ways in maintaining your spinning reel. Proper cleaning and oiling can go a long way.

With well-maintained reels, you can expect great performance and it also helps to help the reel last longer. One way to perform maintenance on your spinning reel is to oil it. There are a lot of ways to put oil or grease on your spinning reels. Below is our guide on how to oil a spinning reel. After reading our guide, you’ll be able to realize just how easy and quick it is to clean and oil a spinning reel.

how to oil a spinning reel

Prepare the Needed Materials for Oiling

Before you start to lubricate your spinning reel, you first have to prepare the needed materials for oiling. You will need the reel oil, some paper towels or rags to clean up, isopropyl alcohol and cotton swabs. To oil a spinning reel, you could work without the alcohol and the cotton swabs, but oiling is more effective with them.

Be sure to be careful with the products you will use in maintenance for your reel. Don’t include gasoline when you prepare the needed materials for oiling. You should never use gasoline in servicing your reels because it can potentially melt the plastic parts of your reels. You should use biodegradable products or isopropyl alcohol to clean your reels.

Remove the Spool Assembly by Turning the Drag Knob Counter Clockwise

After you prepare the needed materials for oiling, the second step would be to remove the spool assembly by turning the drag knob counter clockwise. For reels that a have rear drag, the release of spool assemblies can be done by pushing the release button. After removing the spool assembly, inspect for damages.

If there's none, you can start by cleaning the reel using some alcohol and cotton swabs. Again, never use products that could potentially damage your reel. Isopropyl alcohol makes for an ideal cleaning agent. Cleaning before oiling your reel also causes the effect of the lubricant to be better.

After cleaning your reel with the alcohol, you can then start putting some oil on the assembly. Next would be knowing which parts are to be lubricated with oil.

Which Parts Are to Be Lubricated with Oil

You need to put oil on everything that moves, is the best guideline, to perform proper maintenance. The parts of the reel that needs to be oiled are the line roller assembly, drive gear bearings, maintenance port and bail arm assembly. Depending on the type of reel you have, there might be more places you need to put oil on.

You can apply a drop, two or more, to the parts or use a cotton swab to gently lubricate the sections of the reel. Knowing which parts are to be oiled ensures you cover everything. Missing a spot can affect the reel's performance and increase its damage. When using oil, use the cotton swab or simply put a drop or two on the parts.

All operations of the spinning reel should then move smoothly. Another caution with oiling your spinning reel is to not use any degreaser, as it can cause premature wear and tear on the internal parts of the reel.

If you still think you don’t want to apply oil on the spinning reel yourself, you can always find a friend who knows how or a professional who can help you out with your trouble. However, it is always advantageous and crucial to learn the skill of doing the maintenance on your own, for your own convenience.

As you can see, it is actually quite easy to oil a spinning reel. You don’t have to fret needing to know too many technical details about performing maintenance on your spinning reel. All you have to do is know the basics on how to dismantle your reel and that's about it.

Which Parts Are to Be Lubricated with Oil

Dismantling the reel isn't even hard and might actually be fun for you. Don't be intimidated with putting oil on your spinning reel yourself. It's super easy and you also don't have to worry about damaging any part when dismantling and assembling the reel. It's actually harder to destroy some parts of the reel when oiling than not.

Follow the easy steps in how to oil your spinning reel and you’ll be surprised with just how easy it can be done. Again, all you have to do is to prepare the needed materials for oiling the spinning reel. Then, remove the spool assembly by turning the drag knob counter clockwise and begin inspecting for damages if there are any.

Lastly, simply put a drop or two of oil into all the necessary parts that need oiling. Know which parts are to be oiled to ensure you cover everything. We hope our guide with how to oil a spinning reel has been really helpful. Oiling your spinning reel should be a quick and effective process that lets you have a well-functioning reel, and it also helps the reel to last longer.

Learn the skill of required to perform the maintenance of your spinning reel and you shouldn’t have problems with having it cleaned or oiled.