Crappie Archives |

The Best Types of Crappie Knots

The-Best-Types-of-Crappie-Knots
The Best Types of Crappie Knots

There are numerous different ways to tie crappie knots, and each serves its own purpose.

Some fishers prefer to use double crappie knots, single knots, or Palomar knots. Which knots to use depends on what kinds of fishing methods they will use. In this article, we will describe two ways of tying a crappie jig to a line and more tips on which knots to use.

2 Ways of Tying a Crappie Jig to a Line

One of the keys to effectively using jigs is tying them up correctly depending on the overall rig setup. Here are two common ways and steps of how to tie a crappie jig knot:

Cinch Knot

Tying the Best Crappie Cinch KnotFishers usually use the cinch knot when they are using bobbers or a cork which are often used in vertical jigging or shooting docks. Here’s a quick guide on how to tie cinch crappie knots:

1. Insert the line through the loop in your jig.

2. Double over the jig and wrap the line around your two fingers.

3. Insert the jig into the loop using your fingers three times.

4. Cinch the loop tight, and it’s ready to go.

That’s it: fast and easy. Remember to pull the line toward your hook every time you catch a fish to make sure that the jig faces upward when placed in the water.

Loop Knot

The Best Way to Tie a Loop Knot for Crappie FishingLoop crappie knots are usually used by anglers when they’re not using a bobber or cork. Here’s a really simple way of doing a loop knot:

1. Grab the line and create a loop, leaving a 3 to 4 inch tag end on the left side of the line.

2. Insert the hook into the end of the line.

3. Grab the tag end and insert it into the knot that you created in step 1. Cinch it down. You should have the tag end and the main line shooting off to the right side.

4. Cinch the loop. Wrap the tag end to the main line 3 to 5 times and then insert the tag end to the loop.

5. Pull the main line and tag end to close off the loop.

This kind of loop knot makes sure that no debris like weeds or other plants will get stuck on the lure because of the gap between the hook and the knot.

Is There a Best Way to Tie a Crappie Jig?

In most cases, there is none. A lot of opinions here may vary, but different rigs require a different crappie knot. For example, the Palomar knot is needed for a drop shot rig since it will make the hook face upward which is a key feature of this particular rig. So a lot of anglers agree that there is no best way to tie a crappie jig, but there are perfect knots for specific rigs.

Key Takeaways: Tips on How to Tie a Crappie Jig Knot

These panfish tips will help you catch more crappies every time you go out fishing. Tying crappie knots properly is an important aspect of having a perfectly set up crappie fishing rig. There are so many options of tying a crappie jig to fishing line that you will never run out of options. Two of the most common knots are cinch and loop knots. Each kind of fishing knots serve different purposes, so explore and keep learning various ways of tying knots to achieve perfect rigs for any situation.

How to River Fish for Crappie

How-to-River-Fish-for-Crappie
How to River Fish for Crappie

Crappies are commonly found in still lakes and reservoirs throughout the year.

They often stay hidden under the cover of brush piles, underwater structures, and human-made structures. Catching fish in still water is already a fun endeavor, but catching fish in rivers where there is a constant flow of water is whole new game. Learning how to river fish for crappie presents new thrill and adventure for anglers. Here we will share tips and tricks on catching and locating river crappies.How to River Fish for Crappie Anywhere

Locating River Crappies

River crappies usually stay in the mouth of a feeder creek or ditch that is connected to the main channel. You’ll often find crappies in these creeks when the current is slow. You can also find crappies in other parts of a river like under logs, rock piles, brush piles, stumps, and even a point. Points provide crappies a sort of shield from the force of the current, so they often stay behind these points. Anything that breaks the current is a good place to look for river crappies.

Further, when locating river crappies, it’s useful to look for sandbars or eddies if there are any. The current that flows from the floodgates of the river will rotate around the sandbars and eddies, and the inward curve of the sandbars will provide a refuge or cover for crappies. Crappies will be along the inner sides of these sandbars and eddies so that’s where you would want to look.

River Crappie Fishing in Current

Rivers tend to have strong currents during certain times of the year, so we need to know how best to approach river crappie fishing in a strong current. Learn How to River Fish for Crappie Fast-TipsIf you have located underwater structures in the river before, you have to keep in mind that if the river has a constant flow of current, the underwater structures may move or shift quickly. So you may not find a sandbar in the same location where you found it before. Always stay on the lookout for these kinds of drastic changes.

A sonar fish finder will come in handy for crappie fishing in currents since it will give you a detailed view of what’s below. Locating river crappies in a river with constant current is tricky. You may find yourself spending more time in looking for crappies than actual fishing for them.

More Tips for Small River Crappie Fishing

*Carefully study the structure of the river you’re fishing in. If you can, do some research online or offline about the river’s structures and where you can find crappies. This can save you a lot of time on the day you decide to go crappie fishing in a strong current.

*You can ask customers or the staff at fishing stores if they’ve fished in a certain river before. They may be able to give you a firsthand and detailed account of what it’s like to fish for crappies in that particular river.

Summary

River crappie fishing can be intimidating for some anglers. However, learning how to river fish for crappie will give you more options of where to fish and will certainly be an exciting challenge. When locating river crappies, focus on finding cover and underwater structures. River crappie fishing, when done right, can be as productive as crappie fishing in lakes.

How to Make a Crappie Trap Using Fyke Nets

How-to-Make-a-Crappie-Trap-Using-Fyke-Nets
How to Make a Crappie Trap Using Fyke Nets

If you have your private pond, using crappie traps with bait is an efficient and effective way to catch crappies.

Not only will it catch literally tons of crappie, it will also allow you to leave it and come back for it later. This is great for saving you time and letting you do some other chores. Crappie traps or perch traps are easy to make and cost-efficient, so here we’ll give you the run down on how to make a crappie trap and how to use a fyke net for trapping crappies.

How to Make a Crappie Trap and Find Crappie BaitBefore that, here’s a quick tip: Notice that we said “if you have your private pond” because using crappie traps in state regulated lakes is often illegal due to the fact that crappies are considered game fish or fish that is pursued as sport by anglers. Game fish also can only be caught by hook-and-line methods. If you want to set crappie traps in a public lake, better check with your state if that is legal first. We want you to get heaps of crappie, not fines!

Trap Netting for Crappie Using Fyke Nets

Many anglers use fishing nets to catch crappie if they don’t have time or the skills to build a trap from scratch. Trap netting for crappie is effective since fishing nets are proven to produce results. Some fishers like to use fyke nets when trap netting for crappie.

Fyke nets are an effective kind of fishing trap that is also used for trapping other kinds of fish. You can buy them online or offline at any fishing stores. The fyke nets consist of cylindrical or cone-shaped bags that are mounted on rings or other support structures. They are fixed on the bottom of a pond or lake by anchors, stakes, or ballasts. It has wings or leaders that lure the fish towards the entrance of the bag.

How to Use a Fyke Net as Crappie Traps

How to Make a Crappie Trap Using Fyke Nets

The first step on how to use a fyke net is to select where you’ll place it. Fyke nets are also usually operated in shallow waters, making them perfect for crappies. High nets, usually those that are 1.5 to 3 meters, are used for crappies.

Next, set them up by anchoring the nets to the lake or pond bottom. Also, you can use some help here to make the process faster. Fyke trap netting for crappie works by luring crappies to enter the nets and preventing them from swimming out.

You can even set up the fyke nets and visit the crappie traps every day to collect the captured fish. Leave the gear in the same place for several days for a larger catch.

Summary

Fyke nets are one of the most convenient and effective fishing nets you can use in catching crappie in a passive way. Remember that some state-regulated lakes make it illegal to use crappie traps in catching this fish, so it’s best to check first. Fyke nets also make the process of how to make a crappie trap very easy and convenient.

Practical Tips on How to Fish for Crappie at Night

Practical-Tips-on-How-to-Fish-for-Crappie-at-Night
Practical Tips on How to Fish for Crappie at Night

Night crappie fishing is perhaps one of the most thrilling adventures you can have in your fishing life.

It’s quiet, the stars are looking down on you, and there’s an added challenge of catching a crappie at night. Many would think that night crappie fishing is just a past time and can’t be a productive activity, but how wrong they are! In this article, we will give you useful tips on how to fish for crappie at night to make it a fun and productive activity for you.

How to Fish for Crappie at Night: Underwater Fishing Lights and Gear

How to Fish for Crappie at Night with LED LightsNight crappie fishing requires additional equipment to help you deal with the unique circumstances during night fishing. Here are the recommended gear for night fishing:

1. Hooks and baits. Use smaller hooks; #1 size is usually good. You can use any bait, but it’s ideal to keep them small as well. This is because smaller bait will trigger more crappie strikes but the average crappie will be smaller. The bigger the bait, the fewer strikes you’ll have but the average crappie you can catch will be bigger.

2. Rod and reels. Whatever rod and reels are good enough, but your fishing line must be a micro-filament line or a braided line.

3. Fishing light. Bring “plankton” underwater fishing lights for crappie because these fantastic fishing lights can really attract crappie at night.

4. LED headlamp: Use a LED headlamp to see where you’re going!

5. Carry an electronic depth finder. This is optional but certainly useful if you want to find the biggest schools of crappie quickly.

These are the most basic gears you need for a successful trip of night crappie fishing. The underwater fishing lights for crappie can do wonders for your night fishing, so don’t leave without them!

How to Fish for Crappie at Night-Tips and TricksNight Time Crappie Fishing Secrets

Aside from the gears, there are night time crappie fishing secrets you need to keep in mind. Here are some of the best angler secrets the pros don’t want you to know:

1. Fish on the surface. Don’t let your jigs drop to the bottom because crappies feed at the surface. Crappies are cold-blooded and in constant search for better temperature regulation, so they will always head to the warmer surface at night.

2. Shallows or deep? The general rule of thumb is to fish in the shallows when the water is warm and fish in the deep when the water is cold.

3. Night fishing in heavy pressure lakes. Some lakes have a heavy pressure, and it’s important to fish at the right time. Night crappie fishing or even fishing at dawn is best for heavy pressure lakes. This is because crappies will go towards the shallows and be attracted to docks and piers.

Summary

With these night time crappie fishing secrets, anyone can learn through simple trial and error how to fish for crappie at night in any lake or river. Use the appropriate gear especially fishing lights to attract crappie, and use light hooks and lines. Fish on the surface and in the shallows when it’s warm and in the deeper parts when it’s cold. As always, bring backup rigs just in case anything goes wrong.

How to Troll for Crappie: Gears, Baits, and Speed

How-to-Troll-for-Crappie-Gears-Baits-and-Speed
How to Troll for Crappie Gears, Baits, and Speed

Slow trolling for crappie, also known as spider rigging, is a highly effective and productive crappie fishing technique.

This fishing technique will work in any bodies of water given the right crappie trolling tips. This is the practice of using multiple poles fanned out in the back or front of a boat. Then letting the boat slowly glide on the water, and watching out for bites on each line.

Trolling for Crappie Is Best For:

* fishing when crappies are scattered in a large area
* searching for crappie
* learning the great spots in a new lake

Learn How to Troll for Crappie in a LakeLearning how to troll for crappie is exciting and will let you catch heaps of fish when done right. Here we will discuss the proper gears, proper trolling speed, and more crappie fishing trolling tips.

Slow Trolling for Crappie: Basic Gear

The following are the three primary gears you would need for a successful trip slow trolling for crappie:

1. Multiple rods. When trolling, anglers usually use more than two rods. However, the number of rods and the hooks on each line should be within the limit of the state or lake regulations. So you should check with your local government or lake regulatory bodies if there are any or how many rods are allowed per angler.

2. Rod handle or rack. The rod handle or rack is where you will mount your rods. A standard rod handle can hold up to four crappie rods. Using two rod handles will allow you to spread out and cover a much larger area. Each rod tip should be separated by at least 4 feet to avoid the entanglement of lines.

3. Troll motor. The trolling motor will make it possible for your motor to push you along as slowly as possible. This is absolutely crucial when slow trolling for crappie. The motor should be easy to use and able to do its job with little supervision so you can concentrate on your other fishing tasks.Trolling for Crappie with a Spider Rig

Crappie Trolling Speed

Finding and maintaining the right crappie trolling speed entails complete boat control. This is so important since the boat control is also what is controlling your rod. The right speed depends on a number of factors such as area and the season you’re fishing in.

Many anglers testify how effective a crappie trolling speed range of 0.3 to 0.8 mph is in luring crappie. Sometimes, though, you might need to go a little faster than this to keep your baits up and to fishing lure in shallow water.

More Crappie Trolling Tips

* It’s fairly easy to get bites using crappie trolling during spring, but the challenge is in landing the fish. Use quick-set hooks and lightweight rods to better lock into the fish and catch them as easily as possible.

* The toughest time of the year to use slow trolling is mid-summer to early fall. To attract crappies enough to make them chase your bait, use heavier weights and increase your motor speed.

With these crappie trolling tips in your pocket, go and try trolling for crappie yourself. Make sure to use proper gears, maintain the right crappie trolling speed, keep the crappie trolling tips in mind, and practice. Practice, practice, practice until you learn by heart the best practice on how to troll for crappie.

Drop Shotting for Crappie

Drop-Shotting-for-Crappie
Drop Shotting for Crappie

Drop shotting for crappie is straight-forward, easily used fishing technique used by newbies and seasoned fishers alike when fishing for crappies. This is especially helpful during cold days when crappies are lethargic due to the cold water. This makes it perfect for winter months. Many fishers use it as an alternative technique during slow days. Despite the method’s simple nature, there are special drop shot rigs and techniques that you need to have for successful drop shot fishing for crappie.

Basic Drop Shot Rig for Crappies

How to Best Use Drop Shotting for CrappieA drop shot rig for crappies consists of three main things: a line, hook, and weight. The hook is placed five to six inches above the weight in an upright or horizontal position. The first thing you need to do is to tie the hook on with a Palomar knot and leave a long tag end that can be anywhere from 10 to 36 centimeters long. Then tie the weight at the end of the line below the hook. It’s best to use a split-shot weight. Although, you can also use a bell sinker if the weight is still too light. Then nose hook your crappie bait onto the hook.

Drop Shot Hooks for Panfish

The way you tie the hook is especially important since you want the hook to face upwards. To tie up the hook, just do a basic Palomar knot. Insert the line to the hook and insert it right back through until it forms a loop. Then grab the end of the line you just inserted and the end of the loop. Tie them up together with a single overhead knot like how you would tie your shoelace. However, before you pull and seal it up tight, grab the hook and insert it in the loop. Once the hook is inside the loop, pull and seal the loop up. The Palomar knot will ensure that the drop shot hooks for panfish will face upward.

Techniques for Drop Shot Fishing for Crappie

Hooks for Drop Shotting for CrappieDrop shot fishing for crappie can be a productive activity for you with some fishing tips and tricks. This method will help you suspend your bait near structures or the covers long enough for the lethargic crappies to notice it.

The first thing you want to do is to cast your line and let the bait drop to the bottom. Then place your finger on the line to feel their bite as crappies are known to be light biters. Slowly jiggle your rod up and down, and leave it there for a long time so crappies, even though they’re feeling lethargic, will eventually bite on the bait.

Summary

The key to successful drop shotting for crappie is having a properly set up drop shot rig for crappies and using the right techniques. The weight should be placed 5 to 6 inches below the drop shot hooks for panfish. You can adjust this length depending on where the fish are. Then cast your line and wait for your crappies to come and bite. Remember to pay attention to sensitive movement on your line. Armed with your rig and the know-how, you too can use drop shotting for crappie.

How to Troll Crankbaits for Crappie

How-to-Troll-Crankbaits-for-Crappie
How to Troll Crankbaits for Crappie

Trolling or spider rigging for crappie is an effective way of catching crappies in a vast area of water or in a new lake that you’re unfamiliar with. It lets you cast a wider range for catching crappie in various depths. As in other methods for catching crappie, trolling requires techniques and equipment to maximize your chances for success. Crankbaits are one of the most effective types of bait to use during trolling. In this article, we will discuss how to troll crankbaits for crappie.

How to Troll Crankbaits for Crappie with Spidder Rigging

Crappie Spider Rigging Setup Guide

First, we need to lay out a basic guide of equipment you need for a crappie spider rigging setup. This includes the following:

1. Multiple rods. You need multiple rods since trolling is all about using many rods to catch as many crappies as you can.

2. Rod handler. You can’t hold all of your rods by yourself! You need a solid rod handler to hold them for you. The rod handler should match the height of your boat deck to be able to fit it in nicely.

3. Lightweight lines. You need thin lines (and rods as well), so you can feel the slightest signs of a bite from the crappies which are known to bite lightly.

4. Baits. You can use jigs, live minnows, and crankbaits. Crankbaits are ideal since they create motions and vibrations, effectively getting the attention of crappies.

5. Trolling motor. Trolling motors will let your boat go as slowly as possible.

How to pull crankbaits for crappie.

Learn the Best Practice of How to Troll Crankbaits for Crappie

Four Things You Need on How to Troll Crankbaits for Crappie:

(pick a path, choose a depth, set speed, and stay current)

Pick a path. You need to track a path that will keep you in good water for an extended period. You should consider the wind and the ease of turning around if you need it. Then you need to choose your preferred depth.

Choose a depth. It’s generally safe to use 90 to 110 feet of line when starting out.

Choose a speed. The ideal trolling speed of crappie trolling is between 1.5 mph and 1.7 mph. However, this should also depend on the weather condition and weight of your boat.

Stay current. It’s ideal to go along the natural flow of water, so when there is a current, start at the back of the creek and towards the main channel.

Best Crankbait Colors for Crappie

The color of your crankbaits is important especially in murky waters where crappies can’t see well. Some anglers say that the best crankbait colors for crappie include pink, black and purple, and even red and chartreuse. You can also experiment with yellow, bright blue, or even bright neon green.

Summary

Crappie anglers will see huge benefits in learning how to troll crankbaits for crappie. When learning how to pull crankbaits for crappie, it is important to have the proper crappie spider rigging setup and choose the best crankbait colors for crappie. There are standard crappie spider rigging setups, speeds, and techniques in starting out in crappie trolling, but you can experiment as you go along. With enough practice, any angler can effectively troll for crappies in any depth, speed, and weather conditions.

What Do Crappie Look Like on a Fishfinder

What-Do-Crappie-Look-Like-on-a-Fishfinder
What Do Crappie Look Like on a Fishfinder

In some parts of the year when crappies swim in deeper waters, they are much harder to find than when they swim in the shallows.

What Do Crappie Look Like on a Fishfinder or a Sonar SystemWe have set up this guide with tricks on hooking crappie with sonars and how to use them properly. In times like this, electronic crappie fish finders are your best friend. Crappie fish finders give you real-time scans of the nearby bodies of water, allowing you to see where large schools or individual crappies are hanging out.

However, having the best crappie fish finders won’t help much if you don’t know the answer to what do crappie look like on a fishfinder. Using electronic fish finders can be tricky at first, but it gets easier with practice.

So What Do Crappie Look Like on a Fishfinder?

On any fish finder, crappies will look like white dots that are usually near structures or sheds. These dots are bigger in size than the sheds and usually form large groups.

If you’re unsure if what you’re seeing are crappies, look to your GPS map and see if there is a creek channel of structures near you. If there are channels, chances are the group of big white specks you see around these structures are in fact crappies.

Finding Crappie with Side Imaging or down Imaging

The two most common types of fish finders are side imaging and down imaging sonars. So what’s the difference between them?

Find Out What Crappie Look Like on a FishfinderSide imaging sonars provide you with real-time images under the water to your right and left side. This is ideal if you are trolling and you want to see schools of fish that you pass on your way.

Down imaging sonars, on the other hand, give you a view with amazing details of the area directly below you. This makes them ideal for vertical jiggers.

Each of these types of crappie fish finders uses high-frequency sonar waves to get highly detailed views of your surroundings. With each of these types, crappies generally look the same. Finding crappie with side imaging is usually the same as how to find crappies with down imaging sonars.

Sonar imaging crappie fish finders are the best answer for finding crappie in a new lake, the structures of which you’re not yet familiar with. It also makes it easier to look for crappies in muddy water or even when night fishing. Murky water makes it difficult for crappies to see your bait, so knowing where to catch crappies makes the whole process a lot easier. Night fishing also presents its own problems for fishers like difficulty of crappies to see your baits, so using sonar finders is a good idea as well.

How to Find Crappie on a New Lake Using Sonar Imaging

* Crappies will look like big white spots near underwater structures.

* Crappies will look similar on both side imaging and down imaging.

* Side imaging sonars are great for trolling in large bodies of water while down imaging sonars are great for vertical fishing or night fishing.

Finding crappie with side imaging or down imaging sonars are your best bet if you find it difficult to look for crappies in certain lakes or rivers. Keep your eyes peeled for large white spots near structures of your fish finder.

How to Cook Crappie: Healthy Pan Fried Crappie Recipes

How-to-Cook-Crappie-Healthy-Pan-Fried-Crappie-Recipes
How to Cook Crappie Healthy Pan Fried Crappie Recipes

The fact of the matter is that crappies are exciting to catch and are abundant in various lakes and rivers across the country.

Crappies are also well loved among anglers and their families because of their delicious taste. Crappies have a nice, mild flavor that goes perfectly with most spices and seasonings. There are tons of healthy crappie recipes, and here we will show you one of the easiest pan fried crappie recipes and also how to cook crappie in the oven. So let’s get started on learning how to cook crappie!

Learn the Best Tips on How to Cook Crappie

How to Cook Crappie Pan-Seared: One of the Simplest Pan Fried Crappie Recipes

Pan searing crappie is a great way to cook this delicate fish. Pan fried crappie recipes are really simple and easy, making it among one of the most popular healthy crappie recipes. You can easily do this indoors and even outdoors on the back porch with your family. That is with the right equipment.

Ingredients:

  • Salt
  • Pepper
  • Cornmeal batter
  • Any healthy oil of your choice
  • Crappie fillet

Step 1: Lay out the crappie fillet (learn how to fillet a crappie here) and season it with salt and pepper. Use just a a little pepper to avoid overpowering the delicate fish.

Step 2: Cover the fillet with cornmeal batter. If you want a thicker batter, you can use milk or an egg wash.

Step 3: Heat the pan until it reaches 250 to 275 degrees. Carefully put the crappie fillets in the pan.

Step 4: Fry the crappie fillet for about 2 minutes on each side until they get light brown and tender on the inside. To see if your pan fried crappie fillet is ready, try and see if you can break apart the flakes. If you can, that means the fish is done.

Step 5: Serve!

Wow, that was easy! We’re not done yet with healthy crappie recipes. We have another amazing crappie recipe for you, and this time we will give you a great recipe for baking crappie fillets.

How to Cook Crappie in the Oven

How to Cook Crappie in the Oven

Ingredients:

  • Lemon juice
  • Salt
  • Pepper
  • Nonstick cooking spray

Tools:

  • Baking dish
  • Oven

Step 1: Preheat the oven to 400 degrees Fahrenheit.

Step 2: Get a baking dish and make sure it’s clean (the fish will soak up any recriminates of flavor in the dish). Spray it with the nonstick cooking spray to make sure that the crappie fish won’t stick while baking.

Step 3: Lay the crappie fillets in the baking dish, splash with lemon juice, and sprinkle with pepper and salt.

Step 4: Bake the crappie fillets for about 15 to 20 minutes. You want the meat to be white and flaky.

Step 5: Serve and dig in!

Who knew cooking crappie could be this easy? Now that you know how to cook crappie you can enjoy a variety of recipes. Pan fried crappie recipes are among the easiest ways to cook crappie, and you have complete freedom over the ingredients that you want to use. There are also tons of ways and variations in baking crappie, so you won’t run out of options for healthy crappie recipes.

The endless list of healthy crappie recipes makes crappies one of the most loved fish to eat. You can easily catch crappie with your family and cook them right by the lake, a perfect opportunity to wind down and spend time with each other. Enjoy your fresh fish!

When Do Crappie Spawn?

When-Do-Crappie-Spawn
When Do Crappie Spawn

Crappie spawning season is the time when crappies lay eggs.

This is arguably the most exciting time of the year for crappie fishers. This is the time when anglers can get the most action, largely because crappie are in aggressive feasting mood and they will grab just about anything that looks like live bait. However, the question of most fishing enthusiasts is when do crappie spawn?

Springtime: The Crappie Spawning Season

What is the Crappie Spawning Season Like

Crappies start to spawn in spring time, which is the crappie spawning season of the year. This is their way of “coming back to life” after a long laid back lifestyle during the winter. Anglers believe that when the water temperature reaches somewhere between 56-62 degrees, that’s a sure sign that white crappies are starting or in the middle of spawning.

An important aspect of knowing when do crappie spawn is the difference between the start of spawning season for black and white crappies. Black crappies often start the breeding season when the water temperature hits 50-52 degrees. White crappies will start spawning when the water runs 56-59 degrees. So by the time white crappie start the process of spawning, black crappies are often already done.

Where Do Crappies Spawn in Lakes?

In trying to find where crappie spawn in lakes, remember that crappies love cover. During the crappie spawning season, you will find crappies in the shallows, along the banks, vegetation, piles of leaves or twigs, under man-made structures, or anything that provides them cover. Fish in these areas using any crappie fishing techniques like vertical jigging or cast and retrieve; just be careful not to get too close to the spawning crappie or you’ll spook them and they will scatter all over.

How Do Crappie Spawn?

Crappie in the Brush During Spawning SeasonIt’s also important for anglers to know how crappie spawn and how female and male crappies behave during the crappie spawning season. Females drop their eggs in a place they deem safe, and the male crappie fan out and guard the eggs. Once females drop all of their eggs, they will swim out of the nests and go someplace else, making them trickier to catch. On the other hand, males stay behind to guard the eggs. When the females leave, the males defend their eggs more than they feed. So the cause of their aggressive behaviors towards baits and lures is their drive to protect the eggs and not to feed.

Why is it so important to note how crappie spawn? This will tell you what kind of hooks and baits to use. During crappie spawning season, when male crappie bites the bait, they are just aiming to kill or wound it, not to eat it. So they will chomp once or twice and then spit it out. This raises the need to use a quick hook-set so your catch won’t have the chance to release the bait.

Conclusion

Knowing when do crappie spawn will give you a better idea on where to find these fish. This increases your chances of taking home a delicious treat for yourself and your family. Just remember to keep watch of the water temperature, remember to ask where do crappie spawn in lakes, and keep in mind how crappie spawn, and you’ll surely have a successful crappie fishing trip.